Installation Method Of Living Room Led Crystal Lamp

The crystal shape of the led crystal lamp is also considered to be energy-saving and environmentally friendly, become a key consideration for everyone when purchasing the living room lamps. In order to help friends more comprehensive living room led crystal lamp related common sense, the following editor will give you a detailed introduction to the installation method of the crystal lamp.

1. Check if the lamp parts are complete: It is necessary to check whether the parts are complete before installation. The living room led crystal lamp is generally composed of a ceiling plate, a hanging plate and the like. Look at the top of the ceiling plate and the hanging plate without damage and cracks. After checking, find the “back strip” placed on the ideal position of your roof and mark the fixing hole.

2, pay attention to the weight of the crystal chandelier: the roof of the general living room is cement or masonry structure, should be fixed with pre-embedded hooks, bolts, screws, expansion bolts, pay attention to the fixed nut when installing the living room led crystal lamp The carrying capacity should match the weight of the crystal chandelier. Use the mounting screws in the luminaire to attach the hang plate to the expansion screw. Be careful not to put one side up first and ensure the balance of the hanging board.

3, the installation should do a good job of heat insulation and fire prevention: you must pay attention to the installation of the light bulb, do a good job of heat insulation and fire prevention. When installing the lamp, the wiring should be connected to the terminal of the center contact, and the neutral wire should be connected to the threaded terminal. Remember to install the light bulb to turn on the light to turn on whether there is no light, and do debugging.

We have 2 Rings Crystal Hanging Light, Modern K9 Crystal Hanging Light, LED K9 Modern Crystal Chandelier, etc., available for consultation, welcome to consult and order.