Care And Cleaning Of LED Crystal Chandelier

Care and cleaning of LED Crystal Chandelier:

1. The construction of the workbench: If there is no hydraulic automatic lift, it is necessary to build a simple and safe degradable work platform. The platform height is lifted by people, and the crystal chandelier with strange shape can touch the highest part of the lamp body.

2. The crystal beads wipe: When rubbing the beads, be sure to have a soft cloth dipped in the diluted water of the detergent, gently wipe the front side of the crystal beads at the same time (when wiping, do not pinch the beads to pull down, so as not to break the beads string).

3. Maintain the balance of the lamp body: If you want to remove all the bead strings, the large lamps should pay attention to the balance of the lamp body when the beads are removed. Do not remove the side and then remove the other side to cause the lamp body to tilt, resulting in the lamp body or outside. The frame is deformed; it should be removed before and after.

4. Wipe bracket accessories: When wiping the brackets and accessories, do not touch the water with soft cloth, especially alcohol, so as not to damage the protective film outside the plating layer, affecting the surface gloss effect of the lamp holder.

5. Pay attention to safe operation: When wiping the lamp holder, cut off the power supply; the bulb should also be removed and wiped clean before being installed; the bulb should be moderately screwed in too much, too loose to cause poor contact; too tight may ruin the bulb.

Sixth, timely replacement of accessories: found that the beaded connection buckle rust and discoloration, one is not beautiful, the second is easy to crack, it is best to change by the way; found bead string defect, should be filled in time.

We also have 2 Rings Crystal Hanging Light for you, contact us for more product information.